Offline app for electricians

Every mark, on a numbered drawing.

Conduit bending set to the bender in your hand, with a numbered drawing of every mark and the steps in bending order. Plus the code calculators you use every day.

iPhone, iPad and Android · works offline · no account · English and Spanish

What it does

Built for the stick in your hands, not for a textbook.

  • Set to your own bender.Klein®, Ideal®, Gardner Bender® and Greenlee® benders, or a custom bender measured from one stub.
  • 18 bend types.Offsets, rolling offsets, saddles, stub-ups, kicks, segmented and compound 90s, racks, and a multi-bend layout with the 360° check.
  • Five code calculators.Conduit fill, box fill, voltage drop, wire size and ampacity, and Ohm's law, with the NEC® 2023 and 2026 editions and the source under every answer.
  • Works offline, no account.Nothing to sign in to. Your saved jobs stay on your device.
  • English and Spanish.The same screens, with the trade words from the makers' Spanish sheets.
  • One payment. No subscription.Offset, rolling offset, matching offsets, 90° stub-up and Ohm's law are free. Pro is a one-time unlock.

The app

One screen per bend. Marks update as you type.

The offset screen: depth, angle and distance to the obstacle, with two numbered marks on a drawing of the stick
Offsets
Depth, angle and distance to the obstacle; every mark from the end.
The three-point saddle screen: three numbered marks and the steps in bending order
Saddles
Center and outer marks, numbered in bending order.
The bender list, with a Klein 3/4 inch EMT bender picked and the makers' heads to add
Your benders
Pick the head you own, or measure a custom one.
A layout with three bends on one stick and the 360° check
Layouts
Many bends on one stick, with the 360° check between pull points.

Numbers you can check

Every answer says where it comes from.

Exact or as printed

Switch between the exact geometry and the numbers as the maker prints them in the bender guide.

As printed: Klein® Conduit Bender Guide, worked example

The code edition named

Fill, box fill, voltage drop and ampacity name the NEC® edition and the table under every answer.

NEC® 2023, Table 310.16, 75 °C column

Tested on the makers' examples

Bendbook's marks are checked against every worked example Klein and Ideal print in their bender guides, and against the Greenlee 1800's printed charts.

Klein® and Ideal® worked examples · Greenlee® 1800 charts

One payment, no subscription

Start with the bends you make most.

Offset, rolling offset, matching offsets, 90° stub-up and Ohm's law are free. Pro unlocks the rest once, for good.